We are a growth-oriented, vertically integrated and innovation-driven energy services company providing hydraulic fracturing, completion services and other complementary products and services to leading upstream oil and gas companies engaged in the exploration and production (“E&P”) of North American unconventional oil and natural gas resources. Founded in 2016, ProFrac was built to be the go-to service provider for E&P companies’ most demanding hydraulic fracturing needs. We are focused on employing new technologies to significantly reduce “greenhouse gas” (“GHG”) emissions and increase efficiency in what has historically been an emissions-intensive component of the unconventional E&P development process. We believe the technical and operational capabilities of our fleets ideally position us to capture increased demand resulting from the market recovery and our customers’ shifting preferences favoring the sustainable development of natural resources. Our operations are primarily focused in the West Texas, East Texas/Louisiana, South Texas, Oklahoma, Uinta and Appalachian regions, where we have cultivated deep and longstanding customer relationships with some of those regions’ most active E&P companies. We operate in three business segments: stimulation services, manufacturing and proppant production. We believe we are the largest privately owned, and second largest overall, provider of hydraulic fracturing services in North America by hydraulic horsepower (“HHP”), with aggregate installed capacity of over 1.7 million HHP across 34 conventional fleets, of which, as of March 31, 2022, 31 were active, reflecting a net installed capacity of approximately 1.5 million HHP across our active fleets. We believe a greater percentage of our conventional fleets prior to the FTSI Acquisition incorporated lower-emission Tier IV diesel engines relative to our peers, making them among the most emissions-friendly and capable in the industry. Further, we believe that because of those fleets’ capabilities and reliability, and our relentless focus on efficient and environmentally-sound energy service solutions, our high-quality customer base views us as an integral partner in their efforts to improve their environmental, social and governance (“ESG”) profiles without sacrificing service quality. Our lower-emission conventional hydraulic fracturing fleets have been designed to reduce our customers’ relative emissions footprint while handling the most demanding well completions, which are characterized by higher pumping pressures, higher pumping volumes, longer horizontal wellbores, more frac stages per lateral and increasing amounts of proppant pumped per well. Approximately 90% of our Pre-Acquisition Fleets are less than six years old, with 60% having Tier IV engines and 49% having dual fuel capabilities as of March 31, 2022. In addition, we have paired these technologies with our proprietary ESCs to reduce idle time, which is the time during which an engine generates the highest amount of emissions, by as much as 90%, and reduce fuel consumption and GHG emissions by as much as 24%. In addition, these ESCs are capable of cold starting the engines on our pumping units without the assistance of truck tractors. This technology allows us to significantly decrease the number of truck tractors required for our operations, not only further reducing overall emissions but also eliminating the capital, safety risks and operating and maintenance costs associated with operating the additional truck tractors required for fleets that do not utilize ESCs. On the whole, these cost savings are significant, allowing us to avoid an incremental $15,000 per year in costs associated with each truck tractor eliminated from our operations. Since early 2021, we have installed ESCs in seven fleets, and have reduced our truck tractor count by 125. We continue to install ESCs throughout our fleets, with 141 pumps equipped with ESCs as of March 31, 2022, and anticipate being able to realize total cost savings of approximately $300,000 per year per fleet as a result. When further combined with our real time GHG emissions monitoring, our fleets create additional synergies in efficiency that result in cost savings for our customers. We intend to continue to upgrade and overhaul our other fleets with the goal of having all of our conventional fleets similarly equipped, a process made cheaper by our in-house manufacturing capabilities detailed below. This strategy aligns with our ESG initiative to minimize our carbon footprint as a part of our goal to have all of our conventional fleets equipped with emissions reduction technology. By contrast, many of the fleets we acquired in the FTSI Acquisition are substantially older, are generally less technologically advanced and do not have the same attractive emissions profile as our Pre-Acquisition Fleets. These legacy fleets may require additional maintenance and capital expenditures and may be unable to reduce our customers’ relative emissions footprint or satisfy their ESG objectives. Following the completion of the FTSI Acquisition, approximately 60% of our fleets are less than six years old, with 30% having Tier IV engines and 40% having dual fuel capabilities as of March 31, 2022. After giving effect to our retirement of 650,000 HHP from 11 of FTSI’s older, emissions-intensive fleets acquired in the FTSI Acquisition, 40% of our fleets will have Tier IV engines and 54% of our fleets will have dual fuel capabilities. In addition to our existing low-emission conventional fleets, we are constructing electric powered hydraulic fracturing fleets equipped with Clean Fleet® technology licensed from USWS. Under our agreement with USWS, we have acquired 3 licenses and may acquire up to 17 additional licenses (along with certain other rights) to construct in-house new, electric-powered hydraulic fracturing fleets utilizing Clean Fleet® technology. This technology utilizes electric motors powered by lower-cost, lower-emission power solutions, including local utility-sourced line power, or on-site generation from natural gas produced and conditioned in the field, CNG, LNG, and/or traditional fuels, if needed. This flexibility in fuel supply can provide our customers with additional tools to meet their emissions and sustainability goals by reducing their reliance on diesel, as well as offer potentially significant fuel cost savings. We believe that our fleets equipped with Clean Fleet® technology will supplement our environmentally advantaged conventional fleets and provide our customers an optimized suite of options to satisfy their ESG objectives while maximizing operating efficiency. We expect to begin deploying the first of these electric-powered hydraulic fracturing fleets in the second quarter of 2022, and we have two more under construction, which we expect to be ready for deployment during the second half of 2022. We believe that our new electric fleets, together with our existing conventional fleets, which we continue to optimize to incorporate efficiency-enhancing features, place us on the leading edge of the domestic hydraulic fracturing business and position us to maintain a high equipment utilization rate, low emissions and attractive profitability. Facilitating the advanced technology and operational capability of our equipment is our vertically integrated business model and supply chain management, which allows us to manufacture, assemble, repair and maintain our own fleets and ancillary frac equipment, including power ends, fluid ends, flow iron and monolines. Our vertically integrated business model also allows us to offer customers a suite of ancillary services that enhance the efficacy of the well completion process, including sand, completion chemicals and related equipment. We operate facilities in Cisco, Aledo and Fort Worth, Texas, including an ISO 9001 2015 certified OEM manufacturing facility, in which we manufacture and refurbish many of the components used by our fleets, including pumps, fluid ends, power ends, flow iron and other consumables and an engine and transmission rebuild facility that is licensed to provide warranty repairs on our transmissions. These facilities, which have a proven capability to manufacture up to 22 pumps, or 55,000 HHP, per month (including electric fleets) and perform substantially all of the maintenance, repair and servicing of our hydraulic fracturing fleets, provide in-house manufacturing capacity that enables cost-advantaged growth and maintenance. Vertical integration enables us to realize a lower capital investment and operating expense by capturing the margin of manufacturing and/or maintenance, by recycling and refurbishing older machinery in our fleet, as opposed to disposing of it, and by enabling the ongoing improvement of our equipment and processes as part of a continuous research and development cycle. This combination also facilitates our “Acquire, Retire, Replace”™ approach to growing, maintaining and modernizing our fleets, and helps us mitigate supply chain constraints that have disrupted competitors’ and customers’ operations in the past. For example, as part of the FTSI Acquisition we are implementing our “Acquire, Retire, Replace”™ strategy by retiring 650,000 HHP of FTSI’s older, emissions-intensive fleets and recycling or refurbishing equipment from such fleets. Our in-house manufacturing capabilities also allow us to rapidly implement new technologies in a cost-effective manner not possible for many of our peers. We believe that as a result of this vertical integration, we are able to achieve conventional Tier IV dual fuel fleet construction costs of $540 per HHP contrasted with an industry cost of up to $861 per HHP, according to Daniel Energy Partners, and an average expected price to build electric fleets, excluding power generation, of $467 per HHP inclusive of licensing costs. Our manufacturing capabilities and control over the manufacturing process have allowed us to design and build hydraulic fracturing fleets to uniform specifications intended for deployment in resource basins requiring high levels of pressure, flow rate and sand intensity. We believe the standardized, modular configuration of our equipment provides us with several competitive advantages, including reduced repair and maintenance costs, reduced downtime, reduced inventory costs, reduced complexity in our operations, training efficiencies and the ability to redeploy equipment among operating basins. We believe that our uniform fleet specifications along with the ability to more directly control our supply chain and end-of-life management for our equipment differentiates us from competitors who typically purchase such equipment from third party manufacturers and rely on such manufacturers or other third parties for repair and maintenance. We also provide ancillary products and services, further increasing our value as a business partner to our customers, including frac sand, completion chemicals, frac design and related services, logistics coordination and real time data reporting, such as operational statistics, inventory management, completions updates and emissions monitoring. Through our recent convertible preferred equity investment in Flotek, we have gained access to a low-cost, long-term supply of a full suite of completion chemicals required by our customers during the completion process, including Flotek’s proprietary biodegradable complex nano-Fluid® technology, which is more environmentally friendly than commonly used alternatives. In addition, to meet our customers’ need for proppant, we operate an approximate three-million-ton-per-year sand mine and processing facility in Kermit, Texas, with 40.7 million tons of proved reserves as of December 31, 2021, which allows us to sell proppant to our customers in West Texas and Southeastern New Mexico. We also recently acquired approximately 6,700 acres near Lamesa, Texas, which we refer to as West Munger, that we are developing into an in-basin Permian Basin frac sand resource. We are in the process of installing mining and processing facilities at West Munger which, once operational, will be one of only two sand mines in the Midland Basin. West Munger and the Kermit sand mine are each located within 100 miles of approximately 98% of all horizontal rigs in the Permian Basin, providing us with ready access to potential customers. Our integrated service platform creates operational efficiencies for our customers and allows us to capture a greater portion of their development capital spending, positioning us to maintain high equipment utilization rates, low emissions and attractive profitability. Our principal executive offices are located at 333 Shops Boulevard, Suite 301, Willow Park, Texas.

ProFrac Holding Corp.

We are a growth-oriented, vertically integrated and innovation-driven energy services company providing hydraulic fracturing, completion services and other complementary products and services to leading upstream oil and gas companies engaged in the exploration and production (“E&P”) of North American unconventional oil and natural gas resources. Our principal executive offices are located at 333 Shops Boulevard, Suite 301, Willow Park, Texas.

Should you buy, sell, or hold ProFrac Holding Corp. (ACDC) ?

ProFrac Holding Corp. (ACDC) : Buy or Sell